The metal slitting machine is a device for longitudinal slitting of wide-rolled coils metal materials. The slitting machine structure: equipment consisting of unwinding (unwinding), leading positioning, slitting and slitting, and coiling (rewinding). Its main function is to cut a wide roll of material into a narrow coil of a certain size in the length direction, preparing for other processing procedures in the future.
Advantages of metal slitting machine: reasonable layout, convenient operation, high degree of automation, high production efficiency, high working accuracy, and can process various cold-rolled, hot-rolled coils, silicon steel plates, stainless steel plates, color plates, aluminum plates, and after electroplating or All kinds of metal plates after painting.
Features of Metal Slitting Machine:
Each part of the metal slitting machine is controlled, centralized panel operation, easy to operate.
The main functions of the panel of the metal slitting machine include: two-stage length counting, the labeling position is not affected by the tape stop positioning; labeling length counting; cycle technology; speed display; second start, automatic axis exchange at a fixed point.
The metal slitting machine can automatically exchange shafts: after the winding operation of the slitting equipment is completed, the two shafts are automatically exchanged, which is easy to operate and high in efficiency.
Has a bow-shaped unfolding wheel: This unfolding wheel is a unique bow-shaped design, which completely eliminates the wrinkling of the tape during the unfolding or feeding process.
Pneumatic brake of metal slitting machine: When the slitting equipment is stopped, the tape can be stopped instantly, positioning is accurate, and labeling is accurate.
Loading adjustment wheel: To lock the loading of the raw material shaft, you only need to press the handle lightly, and it is easy to adjust the left and right displacement.
Possess low-noise facilities: the raw material shaft pressing wheel is equipped with a silencer, and the noise during the slitting operation is reduced to a low level.
After the slitting equipment is slitting, the rolled tape is clear and transparent.
The safe operation instructions of the metal slitting machine at work are as follows:
After the metal slitter is energized, do not open the electric control door at will, and touch the electrical components with your hands to prevent electric shocks and injury;
Operators should not wear long hair, wear gloves to operate the machine, cuffs should be tightened (except for loading and unloading knives), and the machine should not touch the rollers with hands during operation;
The tool part should be confirmed to be locked, and it should not be touched by hand during operation. Do not place the head too close to the material and the roller when visually inspecting the operation. Pay attention when operating the machine;
Operators operate in strict accordance with the operating procedures and are qualified for post. Do not lean your body against any part of the machine when the machine is running;
When the metal slitting machine is running, it is not allowed to open the door of the control box at will, and use your body, hands, or head to touch the transmission part;
Pay attention to the force coordination and the fixed position of the unwinding when loading, to prevent the raw material from falling off and hurting the feet. When unloading, pay attention to brake the unloading arm pulley to prevent the unloading arm and the winding shaft from falling off the material and hurting the feet;
When opening and closing the door, be careful not to put your hands on the mechanism to prevent your hands from being caught. The clamp rod and the clamp wheel must not be touched by hand during operation. All kinds of tools shall not be placed in any part of the machine.
Your message must be between 20-3,000 characters!
